Sintered NdFeB magent has been commercially available since Novermber 1983. NdFeB magnets offer the higher energy product of any material today and are available in very wide range of shapes, sizes and grade.
Bonded NdFeB magnet represents one of the more important groups of magnetic materials available today. They can be tailored to suit a wide range of magnetic and physical strength, size, shape, and temperature characteristics.
Hard ferrite (ceramic) magnets are mainly formed by barium ferrite and Strontium ferrite. Even though they exhibit low energy (compared with other permanent magnet materials) and are relatively brittle and hard,
Plastic magnet is different from the traditional magnetic craft which made by mixing the magnetic particle with plastic medium, mixed and heated by the injection machine and then rip the mixture into the mould to get different shapes of production, this kind of process makes the plastic magnet has some unique advantages: the precise magnet with complex shape can be made very easily; during the subsequent assembly and use the magnet is hard to crack; it can form in one piece with inlaid element easily.
AlNiCo Magnets are fored by casting or powder metallurgical processes. Both of them have good corrosion resistance characteristic, no coating is needed for surface protection. AlNiCo remains the workhorse of the permanent magnet industry and can be relied upon to deliver impressive flux density at an economical price. AlNiCo also boasts the lowest temperature coefficient of any commercial magnet material(.02% per degree centigrade) allowing for excellent stability over a wide temperature range. The maximum working temperature can be higher than 400 degree for this magnets.
Flexible magnet is made by mixing ferrite magnet powder with synthetic rubber or plastic.This type of magnet has excellent flexibility characteristic in permanent magnetic material field. It can be easily folded, twisted without damaging the magnetic properties of the magnet. It also have excellent machining characteristic which cutting, punching, drilling and sawing can be easily done using normal tools, such us scissors.
Magnetic tube is mainly used to remove powder, flake and granular material in the ferromagnetic impurities, widely used in ceramics, electricity, mining, plastics, chemicals, rubber, pharmaceutical, food, environmental, pigments, dyes, electronics, metallurgy and other industries. Tube size can be customized as per your request.
Magnetic drawer is mainly used to remove powder, flake and granular material in the ferromagnetic impurities, widely used in ceramics, electricity, mining, plastics, chemicals, rubber, pharmaceutical, food, environmental, pigments, dyes, electronics, metallurgy and other industries. As it is no energy consumption, pollution-free, simple structure, so it is much mopopular in the separator industry.
Pot magnet are made up of magnets(NdFeB, AlNiCo, SmCo, Hard Ferrite)and other spare parts, such as metal ,plastic, rubber and other components. They are widely used in Automotive, machine shops, engineering, construction, recycling, etc. Sometimes pot magnet can meet some special requirements while a single magnet can not do. In the meantime, pot magnet can save you much more cost than just using magnet and gain the same effect.
Permanent magnetic lifter has strong magnetic path produced by NdFeB magnet.On and off of the magnetic path is controlled by turning the manual handle.The lifters have the features of strong attraction,smaller volume,lighter weight,powerful lifting effort,easy and safe to operate ,long-period effort and without power supply.They are been used to lift and transport the steel and iron for factories,docks,ware houses,transportation etc.